The cartridge filter model GIC X is equipped with automatic cleaning and with integrated blower in its structure, automatic cleaning by means of compressed air targeted for the filtration and relative separation of medium, fine and impalpable dust.
The automatic cleaning system allows almost continuous dust loss and keeps the extraction process constant.
Operating principles of GICX filters
The dust -filled air enters the side wall of the filter through the hole into the back inlet. Coarser dust present in the extracted air is immediately depressed by means of the separation chamber and drops into the container hopper because of the lessening of speed.
Passing the quiet chamber, dust then enters the filtering sleeves passing from the outside into the inside, thereby depositing the impurities in the container hopper. While in function, the filter is always kept at maximum efficiency through a system of cyclical cleaning moving into the opposite direction.
A compressed blast of air, gathered in the correct tank, is rapidly injected into the inside if the filtering sleeves, creating a shakingly violent wave in the opposite direction. This enables it to release the dust particles and let them far from being deposited on the outside of the filtering sleeves.
The screw moves dust from alongside the star valve and in its turn will unload dust cyclically.
The filter is made entirely of very thick galvanized steel sheet , opportunely worked to make it last a long time.
The filter has a filtering sleeves pneumatic cleaning system and a cyclical program me to wash the filtering sleeves. Besides this, it also has complete inspection doors, fireproof door and dust container hopper with quick release.